杂志简称：herpetozoa
中文译名：《爬虫》
收录属性：scie（2024版）, 英文期刊,
自引率：44.50%
投稿方向：生物学、zoology 动物学
SCI/E期刊基本信息
出版周期：年刊 地区：奥地利
中科院分区：4区
是否TOP：非TOP期刊
是否综述：非综述期刊
是否OA：非OA期刊
国际标准刊号：ISSN1013-4425；EISSNISSN 2682-955X
杂志语言：其他
出版国家：奥地利
杂志官网 联系方式
出版地址：12 PROF GEORGI ZLATARSKI ST,SOFIA,BULGARIA,1700
杂志邮箱：
投稿网址：https://herpetozoa.pensoft.net/about
杂志官方网址：https://herpetozoa.pensoft.net/
出版商网址：http://www.pensoft.net
杂志投稿要求
投稿须知【杂志社官方网站信息】
Author Guidelines
Main Text
Title: The title should be in a sentence case (only scientific, geographic or person names should be with a first capital letter, i.e. Elater ferrugineus L., Germany, etc.), and should include an accurate, clear and concise description of the reported work, avoiding abbreviations. The higher taxa within the title should be separated with commas and not with a semicolon, e.g.: (Coleoptera, Elateridae, Elaterini). Please enter the desired running title for the page headings in brackets.
Authors and Affiliations: Provide the complete names of all authors, and their addresses for correspondence, including e.g., institutional affiliation (e.g. university, institute), location (street, boulevard), city, state/province (if applicable), and country. One of the authors should be designated as the corresponding author. It is the corresponding author's responsibility to ensure that the author list, and the individual contributions to the study are accurate and complete. If the article has been submitted on behalf of a consortium, all consortium members and their affiliations should be listed after the Acknowledgements section.
Abstract and Keywords: Please have your abstract and keywords ready for input into the submission module. The abstract should contain max. 250 words. A maximum of 10 key words may be given, which are not already in the title.
Body Text: Manuscripts must be submitted in English. Authors should confirm the English language quality of their texts or alternatively request thorough linguistic editing prior to peer-review at a price. Manuscripts written in poor English are subject to rejection prior to peer-review. Use either British/Commonwealth or American English provided that the language is consistent within the paper. Each text must be written with precision, clarity, and economy, whenever appropriate in active voice and first person. Avoid the use of parenthetical comments and italics or bold for emphasis. This journal discourages the use of quotation marks except for direct quotations, words defined by the author, and words used in unusual contexts. Short quotations should be embedded in the text and enclosed in double quotation marks (''). Long quotations should be on a separate line, italicized, but without quotation marks. Single quotation marks are to be used only for a quotation that occurs within another quotation.
Spacing, Fonts, and Page Numbering: Double or 1.5 lines space all material (text, quotations, figure legends, tables, references, etc.). Separate paragraphs with a blank line. Use a 12-point font (preferably Times New Roman or Arial). For convenience of the reviewers the lines can be numbered, however this is not a compulsory requirement.
Capitals: First capital letters should be used only in the beginning of a sentence, in proper names and in headings and subheadings, as well as to indicate tables, graphs and figure/s within the text. Software programmes should be written with capital letters (e.g., ANOVA, MANOVA, PAUP).
Italicization/Underlining: Scientific names of species and genera, long direct quotations and symbols for variables and constants (except for Greek letters), such as p, F, U, T, N, r, but not for SD (standard deviation), SE (standard error), DF (degrees of freedom) and NS (non significant) should be italicized. These symbols in illustrations and equations should be in italics to match the text. Italics should not be used for emphasis, and not in abbreviations such as e.g., i.e., et al., etc., cf. Underlining of any text is not acceptable.
Abbreviations: Abbreviations should be followed by ‘.' (full stop or period; for instance: i.e., e.g., cf., etc.). Note that you shouldn't add a full stop at the end of abbreviated words if the last letter of the abbreviation is the same as the last letter of the full word. For example, you should abbreviate "Eds", "Dr", "Mr" without full stop at the end. All measures, for instance mm, cm, m, s, L, should be written without full stop.
On the use of dashes: (1) Hyphens are used to link words such as personal names, some prefixes and compound adjectives (the last of which vary depending on the style manual in use) (2) En-dash or en-rule (the length of an 'n') is used to link spans. In the context of our journal en-dash should be used to link numerals, sizes, dates and page numbers (e.g., 1977–1981; figs 5–7; pp. 237–258); geographic or name associations (Murray–Darling River; a Federal–State agreement); and character states combinations such as long–pubescent or red–purple. (3) Em-dash or em-rule (the length of an 'm') should be used rarely, only for introducing a subordinate clause in the text that is often used much as we use parentheses. In contrast to parentheses an em-dash can be used alone. En-dashes and em-dashes should not be spaced.
Footnotes: Avoid footnotes in the body text of the manuscript. It is always possible to incorporate the footnote into the main text by rewording the sentences, which greatly facilitates reading. Additionally, footnotes are not always handled well by the journal software, and their usage may cause a failure of submission. Footnotes are acceptable only below tables; instead of numbers, please use (in order): †, ‡, §, |, ¶, #, ††, ‡‡, §§, ||, ¶, ##.
Geographical coordinates: It is strongly recommended to list geographical coordinates as taken from GPS or online gazetteer, or georeferencer (http://wiki.tdwg.org/twiki/bin/view/DarwinCore/GeospatialExtension). Geographical coordinates must be listed in one of the following formats:
Definition: The locality consists of a point represented by coordinate information in the form of latitude and longitude. Information may be in the form of
Degrees, Minutes and Seconds (DMS),
Degrees and Decimal Minutes (DDM), or
Decimal Degrees (DD).
Records should also contain a hemisphere (E or W and N or S) or, with Decimal Degrees, minus (–) signs to indicate western and/or southern hemispheres.
Examples:
Example 1: 36°31'21"N; 114°09'50"W (DMS)
Example 2: 36°31.46'N; 114°09.84'W (DDM)
Example 3: 36.5243°S; 114.1641°W (DD)
Example 4: −36.5243; −114.1641 (DD using minus signs to indicate southern and western hemispheres)
Note on accuracy: Because GPS units are very commonly used today to record latitude/longitude, many authors simply give the GPS readings for their localities. However, these readings are much too accurate. For example, a GPS unit might give the latitude in decimal seconds as 28°16'55.87"N. Since one second of latitude is about 30 m on the ground, the second figure after the decimal in 55.87 represents 30 cm, yet a typical handheld GPS unit is only accurate at best to a few metres.
We therefore recommend two ways to report GPS-based locations. If you give the GPS reading without rounding off, make sure you include an uncertainty figure as a context for the over-accurate GPS reading. We recommend the Darwin Core definition of uncertainty (http://rs.tdwg.org/dwc/terms/index.htm#coordinateUncertaintyInMeters):
"The horizontal distance (in meters) from the given decimalLatitude and decimalLongitude describing the smallest circle containing the whole of the Location."
If you only give the GPS reading, please round it off to an implied precision appropriate to the error in the measurement, or to the extent of the area sampled. We suggest rounding off
to the nearest second in degree-minute-second format (28°16'56"N), which implies roughly ± 25-30 m at middle latitudes
to four decimal places in decimal degree format (28.2822°N), which implies roughly ± 10-15 m at middle latitudes
to two decimal places in decimal minute format (28°16.93'N), which implies roughly 15-20 m at middle latitudes
Altitude: Many GPS users simply record the elevation given by their GPS unit. However, GPS elevation is NOT the same as elevation above sea level. GPS units record the elevation above a mathematical model of the earth's surface. The difference between this elevation and elevation above sea level can be tens of metres. In any case, the accuracy of a GPS elevation is often the same as the usual accuracy in horizontal position, so a GPS elevation such as '753 m' is much too accurate and should be rounded off to 'ca 750 m'.
We strongly recommend the use of Example 2 (the DDM format). The other three are also possible but will be recalculated to DDM during the process of online mapping from the HTML version of the paper.
The only restriction on format is in creating a KML (Keyhole Markup Language) file. KML latitudes and longitudes must be in the DD format shown above in Example 4.
Please also consider submitting a table of localities with your manuscript, either as a spreadsheet or in CSV text format. By doing so you will make your specimen localities much more easily available for use in biodiversity databases and geospatial investigations. The geospatial table will be put online as supplementary material for your paper. A minimum table will have three fields: species (or subspecies) name, latitude and longitude. A full table will have the same data for each specimen lot as appears in the text of your paper. Please check latitude/longitude carefully for each entry.
Units: Use the International System of Units (SI) for measurements. Consult Standard Practice for Use of the International System of Units (ASTM Standard E−380−93) for guidance on unit conversions, style, and usage.
Statistics: Use leading zeroes with all numbers, including probability values (e.g., P < 0.001). For every significant F−statistic reported, provide two df values (numerator and denominator). Whenever possible, indicate the year and version of the statistical software used.
Web (HTML) links: Authors are encouraged to include links to other Internet resources in their article. This is especially encouraged in the reference section. When inserting a reference to a web-page, please include the http:// portion of the web address.
Supplementary files: Larger datasets can be uploaded separately as Supplementary Files. Tabular data provided as supplementary files can be uploaded as an Excel spreadsheet (.xls), as an OpenOffice spreadsheets (.ods) or comma separated values file (.csv). As with all uploaded files, please use the standard file extensions.
Headings and subheadings: Main headings: The body text should be subdivided into different sections with appropriate headings. Where possible, the following standard headings should be used: Introduction, Methods, Results, Discussion, Conclusions, Acknowledgements, References. These headings need to be in bold font on a separate line and start with a first capital letter. Please do not number headings or subheadings.
Introduction − The motivation or purpose of your research should appear in the Introduction, where you state the questions you sought to answer, and then provide some of the historical basis for those questions.
Methods − Provide sufficient information to allow someone to repeat your work. A clear description of your experimental design, sampling procedures, and statistical procedures is especially important in papers describing field studies, simulations, or experiments. If you list a product (e.g., animal food, analytical device), supply the name and location of the manufacturer. Give the model number for equipment used. Supply complete citations, including author (or editor), title, year, publisher, and version number, for computer software mentioned in your article.
Results − Results should be stated concisely and without interpretation.
Discussion − Focus on the rigorously supported aspects of your study. Carefully differentiate the results of your study from data obtained from other sources. Interpret your results, relate them to the results of previous research, and discuss the implications of your results or interpretations. Point out results that do not support speculations or the findings of previous research, or that are counter-intuitive. You may choose to include a Speculation subsection in which you pursue new ideas suggested by your research, compare and contrast your research with findings from other systems or other disciplines, pose new questions that are suggested by the results of your study, and suggest ways of answering these new questions.
Conclusion −This should state clearly the main conclusions of the research and give a clear explanation of their importance and relevance. Summary illustrations may be included.
References − The list of References should be included after the final section of the main article body. A blank line should be inserted between single-spaced entries in the list. Authors are requested to include links to online sources of articles, whenever possible!
Where possible, the standard headings should be used in the order given above. Additional headings and modifications are permissible.
Subordinate headings: Subordinate headings (e.g. Field study and Simulation model or Counts, Measurements and Molecular analysis), should be left-justified, italicized, and in a regular sentence case. All subordinate headings should be on a separate line.
English Language Editing
This journal has well-defined policies for English language editing.
Authors are required to have their manuscripts edited by a native English speaker or professional English language editor BEFORE submission. Authors have to confirm by checking a tick box in the submission process that they have followed the above requirement:
"The text is checked by a native English speaker, or professional English language editor, duly acknowledged in the manuscript. I am aware that non-edited manuscripts could be rejected prior to peer-review".
The submission process includes an option to request a professional linguistic and copy editing at a price of EURO 15 per 1800 characters:
The authors are NOT obliged to use Journal's linguistic services, but they must ensure that their manuscripts have passed a proper lingusitic editing before submission.
Citations and References
Citations within the text: Before submitting the manuscript, please check each citation in the text against the References and vice-versa to ensure that they match exactly.
Citations in the text should be formatted as follows:
One author: Smith (1990) or (Smith 1990)
Note: The citations format depends on the way it is incorporated within the article’s text:
Example:
According to Smith (1990), these findings…
These findings have been first reported in the beginning of the nineties (Smith 1990).
Two authors: Brock and Gunderson (2001) or (Brock and Gunderson 2001)
Note: When choosing between formats refer back to examples above.
Three or more authors: Smith et al. (1998) or (Smith et al. 1998)
Note: When choosing between formats refer back to examples above.
When citing more than one source, in-text citations should be ordered by the year of publication, starting with the earliest one:
(Smith et al. 1998, 2000, 2016; Brock and Gunderson 2001; Felt 2006).
Note: When you have a few citations from the same author but from different years (such as the case with Smith et al. above), the first year is taken into consideration when ordering the sources (in this case 1998, which is why Smith et al. come first in the list).
When having two or more fully identical citations (this can happen when you have more than one reference with exactly the same authors and years for one or two authors, or the same first author and year for author teams of three or more), the references are distinguished by adding the letters 'a', 'b', 'c', etc. after the years and this marking is followed in the in-text citations, respectively:
(Reyes-Velasco et al. 2018a, 2018b)
Authorship references for species should include a "," between author and year:
Brianmyia stuckenbergi Woodley, 2012.
References: It is important to format the references properly, because all references will be linked electronically as completely as possible to the papers cited. It is desirable to add a DOI (digital object identifier) number for either the full-text or title and abstract of the article as an addition to traditional volume and page numbers. If a DOI is lacking, it is recommended to add a link to any online source of an article.
List all authors cited in the References. For multiauthored papers, give all author names in full; the abbreviation "et al." is only allowed in the text. All journal titles should be spelled out completely and should not be italicized. Ensure that the References are complete and arranged according to name and year of publication. Personal communications and submitted manuscripts should be listed as unpublished results in the text and not listed in the References section.
Please use the following style for the reference list (or download the Pensoft EndNote style): here. It is also available in Zotero, when searched by journal name.
Published Papers:
Polaszek A, Alonso-Zarazaga M, Bouchet P, Brothers DJ, Evenhuis NL, Krell FT, Lyal CHC, Minelli A, Pyle RL, Robinson N, Thompson FC, van Tol J (2005) ZooBank: The open-access register for zoological taxonomy: Technical Discussion Paper. Bulletin of Zoological Nomenclature 62: 210–220.
Accepted Papers:
Same as above, but ''in press'' appears instead the year in parentheses.
Electronic Journal Articles:
Mallet J, Willmott K (2002) Taxonomy: Renaissance or Tower of Babel? Trends in Ecology and Evolution 18(2): 57–59. https://doi.org/10.1016/S0169-5347(02)00061-7
Paper within conference proceedings:
Orr AG (2006) Odonata in Bornean tropical rain forest formations: Diversity, endemicity and applications for conservation management. In: Cordero Rivera A (Ed.) Forest and Dragonflies. Fourth WDA International Symposium of Odonatology, Pontevedra (Spain), July 2005. Pensoft Publishers, Sofia-Moscow, 51–78.
Book chapters:
Mayr E (2000) The biological species concept. In: Wheeler QD, Meier R (Eds) Species Concepts and Phylogenetic Theory: A Debate. Columbia University Press, New York, 17–29.
Books:
Goix N, Klimaszewski J (2007) Catalogue of Aleocharine Rove Beetles of Canada and Alaska. Pensoft Publishers, Sofia-Moscow, 166 pp.
Book with institutional author:
International Commission on Zoological Nomenclature (1999) International code of zoological nomenclature. Fourth Edition. The International Trust for Zoological Nomenclature, London.
PhD thesis:
Dalebout ML (2002) Species identity, genetic diversity and molecular systematic relationships among the Ziphiidae (beaked whales). PhD Thesis, University of Auckland, Auckland, New Zealand.
Link/URL:
BBC News: Island leopard deemed new species http://news.bbc.co.uk/
Citations of Public Resource Databases: It is highly recommended all appropriate datasets, images, and information to be deposited in public resources. Please provide the relevant accession numbers (and version numbers, if appropriate). Accession numbers should be provided in parentheses after the entity on first use. Examples of such databases include, but are not limited to:
ZooBank (www.zoobank.org)
Morphbank (www.morphbank.net)
Genbank (www.ncbi.nlm.nih.gov/Genbank)
BOLD (www.barcodinglife.org)
Providing accession numbers to data records stored in global data aggregators allows us to link your article to established databases, thus integrating it with a broader collection of scientific information. Please hyperlink all accession numbers through the text or list them directly after the References in the online submission manuscript.
All journal titles should be spelled out completely and should NOT be italicized.
Provide the publisher's name and location when you cite symposia or conference proceedings; distinguish between the conference date and the publication date if both are given. Do not list abstracts or unpublished material in the References. They should be quoted in the text as personal observations, personal communications, or unpublished data, specifying the exact source, with date if possible. When possible, include URLs for articles available online through library subscription or individual journal subscription, or through large international archives, indexes and aggregators, e.g., PubMedCentral, Scopus, CAB Abstracts, etc. URLs for pdf articles that are posted on personal websites only should be avoided.
Authors are encouraged to cite in the References list the publications of the original descriptions of the taxa treated in their manuscript.
Ordering references: All references should be ordered alphabetically by author name (but see below).
If the references have the same first author and a varying number of co-authors, the ordering should be based on the number of co-authors starting with the lowest; all articles with the same first author and two or more co-authors (thus cited as et al. in the text) should be listed chronologically, as follows:
Smith J (2018) Article Title. Journal Name 1: 1–10. https://doi.org/10.3897
Smith J, Gunderson A (2017) Article Title. Journal Name 1: 10–20. https://doi.org/10.3897
Smith J, Gunderson A, Brock B (2011) Article Title. Journal Name 1: 20–30. https://doi.org/10.3897
Smith J, Brock B, Gutierrez R, Gunderson A (2013) Article Title. Journal Name 1: 15–30. https://doi.org/10.3897
Smith J, Brock B, Gunderson A (2015) Article Title. Journal Name 1: 10–30. https://doi.org/10.3897
If both the first author and year of publication match within the categories above, the references are distinguished by adding the letters 'a', 'b', 'c', etc. after the year of publication and this marking is followed in the in-text citations, respectively.
Illustrations, Figures and Tables
General notes on illustrations: Figures must be submitted electronically and must be of sufficient resolution for printing. All illustrations should be prepared according to the format of the journal, such that the figure fills the entire page width (165 mm), or the column width (81 mm), and will not exceed the maximum page length (247 mm). Please submit each figure as a single file and ready for printing at final publication size.
Do not integrate the illustrations within your text files of the final version, since embedded figures are usually useless and cannot be processed.
The preferred file formats are TIFF and PSD for grayscale illustrations and EPS for vector graphics. Please do not send JPG or GIF files, as these are usually not of high enough quality for the printed version.
Should you have any problems in providing the figures in one of the above formats, or in reducing the file below 20 MB, please contact the Editorial Office at herpetozoa@pensoft.net.
Figures: Please submit figure files (photographs, raster images) electronically, with a minimum resolution of 300 dpi as TIFF or better as PSD (Photoshop). Do not reduce multiple layers to one layer.
On the use of Google Maps
All uses of Google Maps and Google Earth Content must provide attribution to Google, according to Google Maps/Earth Additional Terms of Service (see also Permission Guidelines for Google Maps and Google Earth). The attribution should be visible on each map in the form, for example: "Map data 2019 (C) Google".
Take care to optimize the contrast, and use only photographs that are sharp and in focus. Please use a white background for photographs, which will be printed in black and white. When grouping several figures into one plate, it is important to pay attention to the overall brightness of the individual figures. Please leave a margin of 2–5 mm between the figures.
Figure citations in the text should always be with Capital "F" and En-dash for ranges. One figure with a full stop, figures without.
Example: Fig. 1, Figs 1–3, Fig. 2A–E.
Citations of figures from other publications should always be Lower Case (fig. / figs). When two subsequent figures or parts are cited (for instance figures 1 and 2 or A and B), a comma should be used.
Example: Figs 1, 2 and Fig. 1A, B.
Parts belong to one figure.
Example: Fig. 1A, B and Fig. 2A-E.
Vector graphics and line drawings: Line drawings such as diagrams, maps, etc. should be submitted in EPS format, which is the preferred file format for vector graphics. However, you can also submit Adobe Illustrator files. EPS files must contain a TIFF preview. Vector graphics and line drawings must have a printable line thickness of at least 0.2 mm, to enable a sufficiently good print quality. Fonts must be embedded.
Scans: If you scan your figures, please enter the target size with a minimum resolution of 300 dpi for photographs and raster images and 1000 dpi for line drawings. Please save the file as an RGB or grayscale TIFF or PSD (not bitmap). The files will be converted into bitmaps at a later stage.
Diagrams: Diagrams should be created using Adobe Illustrator. Please fill the diagrams with textures, as colour shading will appear gray and cannot be differentiated in black and white. Labeling should be within the diagram. Please avoid unusual symbols in the labeling. If you have created the diagrams using MS Excel, please enclose the original Excel files.
Text in illustrations: Text in illustrations should be as short as possible in sans-serif type (Arial or Helvetica) and regular style. Abbreviations should only be used in the illustration where absolutely necessary, and explained in the legend in alphabetical order.